Castrol Tribol™ CS 1555 compressor oils were specially developed for oil lubricated screw compressors. They exceed the requirements of the DIN 51506 spefication for VDL type compressor oils.
Castrol Tribol CS 1555 series are formulated using polyalphaolefin (PAO) base oils and advanced technology additive systems.
Castrol Tribol CS 1555 are available in the ISO viscosity grades 32, 46, 68 and 100.
Castrol Tribol CS 1555 may be used in all types of oil lubricated compressors such as screw-type, rotary vane and turbo compressors.
They may be used for the compression of air as well as inert gases and hydrocarbon gases.
Extremely low tendency to form carbon deposits, promotes longer valve life and safer operating conditions as well as considerable decrease in fire and explosion hazards.
Reduced maintenance costs are achieved through a considerable increase of service life and reduced downtime periods.
No changeover problems where mineral oil based compressor oils previously used. Because of the higher coking tendency of mineral oil based products it is recommended to remove mineral oil residues to fully utilize the benefits of Castrol Tribol CS 1555.
Increased oxidation stability and corrosion stability, increased life of lubricants and equipment.
Excellent viscosity-temperature characteristics allow start-up at low temperatures and enables a sufficient lubricant film at high temperatures.
Excellent wear protection even under extreme operating conditions (FZG scoring load stage > 10).
Castrol Tribol CS 1555 oils exceed the requirements to be met by DIN 51506, VDL-HC oils.