Castrol Molub-Alloy™WC 2204 SF (previously named Molub-Alloy 2204 SF) Walking Cam Lubricants were developed specifically to lubricate the Monighan Walking Cam Mechanism that relocates large draglines manufactured by CAT (Bucyrus International).
The primary objectives in the development of Molub-Alloy WC 2204 SF Walking Cam Lubricants were to:
Maximize extreme pressure (EP) characteristics but without the use of lead compounds or other materials considered hazardous or undesirable in the management of waste by environmental agencies.
Eliminate "chatter" (vibration) during a relocation.
Reduce product consumption and waste while minimizing cleanup problems.
Molub-Alloy WC 2204 SF Walking Cam Lubricants are formulated with an inorganic thickener system.
Molub-Alloy WC 2204 SF Walking Cam Lubricants forms an adhesive and pliable coating on the cam. This coating grows tougher as it is exposed to the heat and extreme pressure created by the sliding-and-rolling action of the cam and rail in the line contact during walks.
Molub-Alloy WC 2204 SF Walking Cam Lubricants were developed specifically to lubricate the Monighan Walking Cam Mechanism that relocates large CAT (Bucyrus International) manufactured draglines.
Compounded for the protection of the ecology and the elimination of hazardous materials.
Adhesive and pliable coating.
Resists flaking and peeling.
Elimination of “chatter” (vibration) during a walk.
Safe, accurate and economical application when using automatic pressure dispensing systems.
Minimum product consumption, reduction of waste and housekeeping problems with formation of highly durable lubricant film.
Reduction of maintenance, costly repairs and lost production.
This product was previously named Molub-Alloy 2204 SF. The name changed in 2015.