Molub-Alloy OG 8031 range

Open gear Lubricant

CastroI Molub-Alloy™ OG 8031 range (previously called Molub-Alloy™ 8031 range) are based on a high viscosity base oil gel formulated with a non- soap,inorganic thickening system.

  • Family Molub-Alloy OG 8031/2200-00
  • Product category Grease Applications
  • Application Open Gear
  • Product type Greases

Description

CastroI Molub-Alloy™ OG 8031 range (previously called Molub-Alloy™ 8031 range) are based on a high viscosity base oil gel formulated with a non- soap,inorganic thickening system. They contain a high viscosity base fluid especially designed to provide extreme pressure (EP) and anti· wear characteristics to the lubricant.
A proprietary blend of Molub-AIIoy lubricating solids is included to promote anti-wear and load carrying properties. MolubAIIoy lubricating solids work synergistically with chemical reactive antiwear and extreme pressure (EP) additives to reduce contact temperatures and wear while providing the ultimate in anti-weld protection under extreme pressure and shock loading.

Application
Molub-AIIoy OG 8031 is designed to lubricate heavily loaded open gears,screw type actuators,and low to moderate velocity bushings and bearings equipped with centralised or sump type lubrication systems.
This range is recommended for use in open gear applications in cement,mining and any other industries,requiring anti scuff and anti-wear protection and where no product build up is desired. It is also suited for units containing bushings, bearings and/or gears where Iso 2200,3000 or 6000 viscosity grade lubricant is required,but straight fluid lubricams leak out.

Advantages
Formulated to minimise distribution line plugging tendency – minimises the potential for eventual plugging of the lubricant distribution lines commonly associated with conventional greases.
Readily pumpable and slumpable for good lubricant distribution – good lubricant distribution in enclosed and semi-enclosed applications, and drainable for ease of removal from surrounding guards. This product is also
specifically formulated to flush contaminants from gear and pinion flanks, and to resist accumulation in the roots of gear teeth.
Highly thixotropic – exhibits a stable form at rest but becomes a fluid when agitated therefore will not run off the gear teeth. However it will still spread easily and evenly, since the gel-like lube ‘liquefies’ when pressure is
applied carrying away both heat and contaminants.
Formulated to address environmental concerns - free of solvents, lead, antimony, and barium.

Products

Name Viscosity NLGI