Molub-Alloy 8031 range

Heavy duty open gear grease

For use in open gear applications in cement, mining and other industries requiring anti-scuff and anti-wear protection and where product build-up is undesirable.

  • Family Molub-Alloy 8031/3000-00
  • Product category Grease Applications
  • Application Open Gear
  • Product type Greases

Description

For use in open gear applications in cement, mining and other industries requiring anti-scuff and anti-wear protection and where product build-up is undesirable. Also used on screw type actuators and low to moderate velocity bushings and bearings equipped with centralised or sump type lubrication systems.
For the lubrication of heavily loaded open gears, screw type actuators, low to moderate velocity bushings and bearings equipped with centralised or sump type lubrication systems.

Good pumpability
Easy drainage
Solvent-free
Highly thixotropic – exhibits a stable form at rest but becomes a fluid when agitated therefore will not run off the gear teeth

Molub-Alloy 8031 series oils are formulated with high viscosity base fluids and an inorganic thickening system. It also contains EP additives fortified with a blend of lubricating solids to provide outstanding surface protection under boundary conditions.

It is also suited for units containing bushings, bearings and/or gears where straight fluid lubricants would leak out.

Products

Name Viscosity NLGI