Braycote 2115-2

High temperature grease

Castrol Braycote™ 2115 Range (previously called Molub-Alloy™ 2115) greases are thermally stable high temperature synthetic bearing lubricants.

Contact Us

  • OEM approved 1 approvals
  • Product category Grease Applications
  • Application High Temperature


Castrol Braycote™ 2115 Range (previously called Molub-Alloy™ 2115) greases are thermally stable high temperature synthetic bearing lubricants. They are formulated from an advanced synthetic fluid and thickened with a temperature stable non-soap base. Braycote 2115 contains lubricating solids for good wear protection and is designed to greatly extend service life and relubrication intervals in high temperature bearings, compared to conventional greases.

Primarily developed for extended service in oven conveyor bearings, Braycote 2115 are recommended for bearings operating in paint drying ovens, textile tentering frames, and similar applications where minimum reapplication and dripfree performance is required. Braycote 2115 can be used in continuous service at 250°C/482°F and may be exposed to intermittent temperatures up to 280ºC/536ºF. Forced draft ventilation should be used at temperatures exceeding 200ºC. Braycote 2115 can be applied manually or with automatic dispensing equipment.

Thermally and chemically stable – high resistance to oxidation at high temperatures therefore extending relubrication intervals without undue risk of under lubrication,lubrication starvation,or an increase in power draw.
Virtually inert below 300ºC/572ºF- resists the thickening and hardening that is typical of petroleum greases in high temperature service.
Even at high temperatures (refer application section), Braycote 2115 is resistant to most non-fluorinated solvents and most chemicals, including strong acids, alkalis and oxidising agents.
Low volatility - does not volatilise readily at high temperatures and/or when exposed to high vacuum.


Operating temperature Min. -20°C

Max. 280°C
Viscosity 500 mm/s² at 40°C
Oil type PFPE
Thickener PTFE
Food grade No
Product type Greases
Applicable to these sectors Automotive Manufacture, Chemicals, Engineered Wood, Metal Goods, Metals, Power Generation

Case Study

No case studies found matching your search term.
There are no case studies available.
Case Study Download Customer Machine Location Competitor Actions
Inactive case study{{ caseStudy.CaseStudyTitle }} Download Now {{ caseStudy.Customer }} {{ caseStudy.Machinery }} {{ caseStudy.OperationLocation }} {{ caseStudy.CompetitorProduct }}
Edit Case Study

Back to

Not quite sure what you were looking for? – Try searching using our Industrial Product Universe